Re: [Harp-L] Chromatic Plate Fasteners Question
- To: harp-l@xxxxxxxxxx
- Subject: Re: [Harp-L] Chromatic Plate Fasteners Question
- From: Burke Trieschmann <burket@xxxxxxx>
- Date: Mon, 4 Apr 2016 16:04:19 -0400
- Cc: esalisburykeene@xxxxxxxxx
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20150623; t=1459800259; bh=W3TmfFP2BCaf+qiI5kdJi7GldxTKoGrLvrbjEdla0DU=; h=From:To:Subject:Message-Id:Date:MIME-Version:Content-Type; b=OszAGoMNJ0JW6JnYcduZ6h7BxrtOYixriWukXK0CJzyh+3mhdkqIqCp/a31aLM4mC A6BOfIi1YAd0Triq/w0CjL9SREHuaCp3uuEeD48xSl3W4TmjOMj9HuStPwHuIm/MlL S8WKTM9gAMWvA86xyZbOjOV78Fclsp0f4/tDO3BU=
- In-reply-to: <153ddd23a36-454d-a7ba@webprd-a58.mail.aol.com>
My bad. It was pointed out to me Both of these links are to m1.6 x 12mm screws. Which is incorrect.
m1.6 x 16 are harder to track down, but I've found a few eBay sites that have them if you search.
Apologies.
Burke T.
I use M 1.6 X 16 bolts to convert 270's and also for installing Brendan's "Power" combs. When I run short, George's suggestion of 0-80 x 5/8 screws work too.
Here's an eBay source:
http://www.ebay.com/itm/M1-6-x-12mm-Qty-50-Stainless-Steel-Phillips-Pan-Head-Machine-Screws-DIN-7985-/111765840988?hash=item1a05c3645c:g:PBIAAOSwEetV7fzi
Or, On Fastener-express:
http://www.fastener-express.com/M1.6x.35x12mmPanPhillipsMachineScrewsA2StainlessSteelQty.aspx
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.