Re: [Harp-L] Chromatic Plate Fasteners Question
- To: harp-l@xxxxxxxxxx
- Subject: Re: [Harp-L] Chromatic Plate Fasteners Question
- From: Burke Trieschmann <burket@xxxxxxx>
- Date: Sun, 3 Apr 2016 16:30:55 -0400
- Cc: esalisburykeene@xxxxxxxxx
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20150623; t=1459715455; bh=2AD90G6ZAg8GdegOCzW8xwSceUYAbThqI6Gkuo1l+x0=; h=From:To:Subject:Message-Id:Date:MIME-Version:Content-Type; b=7tfMZf/S/1P2kMH1dKwGI/0KG1cKp/wL5bLjw+kU0j3LIpps5MgFtJ0J7vJSMlvLR IOks2fNvrnB+KmD5mb6hFcx3Qdgx+lIbAfexNTV7kBUQjs5zC+zvZ37pQEwkAqUgXO ffpRTzoR6KRdgotRIJGusk9WlsnuCkMQHYDlCv2Q=
- In-reply-to: <201604031240.u33CeQsP013985@harp-l.com>
- References: <201604031240.u33CeQsP013985@harp-l.com>
Hi Emily:
I use M 1.6 X 16 bolts to convert 270's and also for installing Brendan's "Power" combs. When I run short, George's suggestion of 0-80 x 5/8 screws work too.
Here's an eBay source:
http://www.ebay.com/itm/M1-6-x-12mm-Qty-50-Stainless-Steel-Phillips-Pan-Head-Machine-Screws-DIN-7985-/111765840988?hash=item1a05c3645c:g:PBIAAOSwEetV7fzi
Or, On Fastener-express:
http://www.fastener-express.com/M1.6x.35x12mmPanPhillipsMachineScrewsA2StainlessSteelQty.aspx
Burke T.- Audio Producer/ Open Door Productions
www.opendoorprod.com
www.opendoorharmonicas.com
From: George Miklas <harmonicat@xxxxxxxxx>
Emily,
I use 0-80x5/8"
Brendan uses 1.4mm x ???
Cheers
George
Emily,This site may have what you need.
http://www.fastener-express.com/
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.