Re: [Harp-L] Light box for reed work.



Replacing reeds on a Suzuki is much easier if you have the HRT-10, here's a
video--https://www.youtube.com/watch?v=GS9zo4KaN20
If I had to guess, I would say the music bed is Brendan Power.
Here's another video, extreme close up!
https://www.youtube.com/watch?v=PTwmbtZd4Gc
I don't usually recommend Rakuten or other Japanese vendors, but we at
Suzuki US don't sell the HRT-10--here is their link.
http://global.rakuten.com/en/store/westmusic/item/suzuki-hrt-10/?s-id=borderless_recommend_item_en
And now the bad news, it is $300. But I swear it's worth it!
Gnarly

On Sat, Jan 3, 2015 at 9:03 PM, Rick Dempster <rickdempster33@xxxxxxxxx>
wrote:

> Thanks for all that, Ken, Jerry, Joe, Winslow. Yes Winslow, I have watched
> Brendan's vid. I might make one too,
> and edit out all the time spent spitting and cursing while I stick the tape
> down, again and again until the treed is lined up
> properly. Just kidding...sort of...I'm sure Brendan has done this a lot
> more than I have.
> I've been converting the hole seven reeds on Sub30s to make the draw band
> into a blow bend.
> I can do it, but it has just about driven me around the bend (no pun
> intended)
> RD
>
>
> On 4 January 2015 at 14:15, Winslow Yerxa <winslowyerxa@xxxxxxxxx> wrote:
>
> > Great light-box solution, as long as you don't scratch the screen (maybe
> > lay down a layer of clear plastic sheet protector).
> >
> > As to the main difficulty of aligning replacements for previously welded,
> > have you watched Brendan Power's video about replacing welded Suzuki
> reeds?
> >
> > http://youtu.be/kChMKU7LEVo
> >
> > Winslow
> > zzzz
> >
> >
> > ----- Original Message -----
> > From: Rick Dempster <rickdempster33@xxxxxxxxx>
> > To: "harp-l@xxxxxxxxxx" <harp-l@xxxxxxxxxx>
> > Cc:
> > Sent: Saturday, January 3, 2015 4:57 PM
> > Subject: [Harp-L] Light box for reed work.
> >
> > Trying to accurately fit a new reed to a previously spot-welded Suzuki
> has
> > almost driven me insane.
> > <snip> a laptop or I-pad is a perfect lightbox.
> > Eureka!!
> > Trust this is of some use to some other poor sod out there....
> > RD
> >
>



This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.