Re: [Harp-L] Flat sanding

[Matthew Smart <matthewsmart@xxxxxxxxx>]

Your basically removing the burrs created by self tapping screws on the 
backside of the draw plate. You cant flat sand the blow plate but you 
can use a drill bit to remove excess metal there. I did a video on this

http://youtu.be/C88HkWEjfOU


On 10/30/2012 10:25 PM, Steve Webb wrote:
> Can someone clarify for me, what is done to flat sand draw plates? Just a basic definition?
> Thanks,
> Steve in Minn.
>
> Sent from my iPad