Re: [Harp-L] amp stand recommendation
- To: Richard Eisenberg <catketch2@xxxxxxxxx>
- Subject: Re: [Harp-L] amp stand recommendation
- From: Arthur Jennings <timeistight@xxxxxxxxx>
- Date: Sun, 30 Jan 2011 08:38:01 -0800
- Cc: harp-l@xxxxxxxxxx
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:in-reply-to:references:date :message-id:subject:from:to:cc:content-type; bh=pP1SY6Sc2tBXBXMrxG783FCo+LXJnkM0KmMZKEwSHFk=; b=tPTi5ACVcSBtXvzHBJOAH4uaPy1a1Rx+FTd0pQjHyUQTvWxYtXoE/zDc0iUa2fnrgc oJ78gpKFm/eaE3QiqW1ykQXfbzTlIs8FRc3rlESo6tO4ggIb+o+Ob3H/1Icge4qvvxEC svhbTOzDEIOpGh0fELpw5VvRazpBKLzpBzcb0=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=YeIWHiT7RgBgmyFRdkn0N96h6CD7yGidA5eJQMwIr+3WbQkaG5urymUr4voNpVM/Cg 2fuHXHZ2VNaMOEuzmuQaIZbJoESGvDyAwDaAlfem/jQ6bgsY20nfwajbkkTl7ttm4uWU b3/ksJIajP7/Cw5AFPK/u5AREgo6Z8+vQ7W8M=
- In-reply-to: <AANLkTi=ehsvgDah+8A8YExJJ6eAn8i4UMYi5LYdEej9+@mail.gmail.com>
- References: <4D3E27DA.80203@snarkus.com> <4D456CF9.5040400@3hat.org> <AANLkTi=ehsvgDah+8A8YExJJ6eAn8i4UMYi5LYdEej9+@mail.gmail.com>
Sounds interesting. Got any photos of that?
On Sun, Jan 30, 2011 at 7:51 AM, Richard Eisenberg <catketch2@xxxxxxxxx>wrote:
> I made an amp stand out of a milk crate. I cut it with a jig saw after
> marking the cut lines with masking tape. It lifts the amp up off the floor
> and tilts it back. Works good, very inexpensive, holds cords, etc.
>
> On Sun, Jan 30, 2011 at 8:51 AM, fjm <bad_hat@xxxxxxxx> wrote:
>
> > Is anyone aware of a more locally made product? The stands that have
> been
> > listed so far seem quite affordable and well made but they arrive by way
> of
> > a long slow boat trip from another distant part of this world. fjm
> >
>
--
Arthur Jennings
http://www.timeistight.com
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.