[Harp-L] any advice on gapping for bend control?



Shaun,

The Gussow video I was referring to is .016 in his series and can be found here: http://www.youtube.com/watch?v=fkqmXP9IVyg

I went back and looked at it again, and Gussow actually explains how to open the gap on the 3 draw reed so it will bend more easily and does it on camera using an ATM receipt as a gapping tool.

JP



This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.