RE: [Harp-L] using the kx1200 keyboard amp's monitor out as a line out?
- To: harp-l <harp-l@xxxxxxxxxx>
- Subject: RE: [Harp-L] using the kx1200 keyboard amp's monitor out as a line out?
- From: "Eugene Ryan" <ryan.eugene@xxxxxxxxx>
- Date: Tue, 29 Jan 2008 12:50:23 +0000
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=0d24DwHLR+TxaNUagSaCD0FWbhGQUHmmaQ0USyuKM6o=; b=ivSlIgR6SyI2GvaSCE6BcNjoh6sn3f1t+I2rOBfa5XSSLF9xLBz8ftXA7mBFTVzAoTS7S5VUdSXLNIYfOVhtJl0lPIpQ6f2iIWvOYYU8Ncx/bVhNsJDqLRajbmDVJuKsAh6og5IGcVhDqjhz8O+0Gw4iA5ug08m8nztpxL5SdUk=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=TaJChuQxVYFdMkwr8cDuyvDfStimiXzsTR5UdsTPVkkG9yRyEQB1AeuQWqpHE271dK7CifVXgorPfp+B9GWtV2fSv008oD0yzx8mNR/OvltStml6BBAU4XQG1nvkecro7xWbPETdhi6VpQVz/y2RMeUAmlATdYGGF0p6Hv5Yu40=
Judoblues,
I have that same Behringer Kx1200 amp. I've also found it can be hard
to hear when using an amp modeller as input when the rest of the band
is seriously cranked up. Watch the hearing!
I haven't used the amp for a while, but from memory, there are two
outputs on the back, the main out and the "DI" XLR out. Main out
should go into a line level input on the PA, and the "DI" out can go
into an XLR connector on the PA. The FX send and return is for
connecting an external effects box, but presumably you're connecting
the amp modeller into the line input of the amp itself.
Eugene
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.