Re: [Harp-L] Replacement Lee Oskar Reed Plates



That sounds like the right advice. Only thing I might add here is that
I've been meaning to get a commercially made tool kit for years now,
mainly so I can have some of these groovy sounding 'reed wrenches' (may
I call them 'reed spanners' please? - I don't think 'wrenching' a
harmonica reed sounds like a good idea) But, procrastinating cheapskate
that I am, I just keep on using my pointy-nosed pliers - carefully.
Haven't had a mishap yet, though I'm sure the wrenches are easier to
use. having said that, my pliers fit every size reed. Hmm - maybe I need
a reed 'monkey wrench' (that's an adjustable spanner in my lingo BTW)
RD

>>> Jon Harl <jharl@xxxxxxxxxxxxxxxxx> 27/09/2007 7:31 >>>
Marvin, the first thing I would do is take your feeler gauge and  
"plink" the reed to see if you get a clear tone. If not, something  
small may still be lodged in the reed slot. The next thing it could  
be is the reed might be out of alignment, not freely vibrating in the 

reed slot. At that point you'll need a reed wrench to center the  
reed. This may only be a slight adjustment. Lee Oskar has a tool kit  
that has a reed wrench that will fit the harmonica you have. The  
third thing it could be is the gap is too low. If the tip of the reed 

is too low the reed could stall or not play at all. So i would use  
your feeler gauge to widen the gap. Those are the things I can think  
of. I hope one of them works for you. You could also send them back  
to the seller saying the 1 draw doesn't work. I would think a  
reputable retailer would replace it for you.


Jon



On Sep 26, 2007, at 1:30 PM, MARVIN Fleischman wrote:

> I have installed a new set of Lee Oskar Bb reed plates on a Lee  
> Oskar comb and cannot get any sound from the 1 draw. I have  
> tightened the plates screws down as far as they will go and have  
> run a feeler gauge through the reed. Can somebody advise me on  
> getting the 1 draw to sound?
>
> Thanks,
> Marvin Fleischman
>
>
>
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org 
> Harp-L@xxxxxxxxxx 
> http://harp-l.org/mailman/listinfo/harp-l 

_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org 
Harp-L@xxxxxxxxxx 
http://harp-l.org/mailman/listinfo/harp-l




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.