Re: [Harp-L] Gasekting

["ChipComcast" <jandkday@xxxxxxxxxxx>]

Indeed gasket= germ city, leakage is in the reed slot mostly.
My .02
JamesDay

----- Original Message ----- 
From: "Roy Germon" <rgermon@xxxxxxxxxx>
To: <harp-l@xxxxxxxxxx>
Sent: Friday, October 15, 2004 2:19 PM
Subject: Re: [Harp-L] Gasekting


> My naiive opinion is that it shouldn't matter.  A gasket really goes in
between two parts to prevent leakage through the seam.  The gasket could
simply be held in place by the pressure of the two parts rather than
attached to either (as is the case with many automotive gaskets), and it
should have the same effect.
>
> rg
>
> Ryan Hartt <rhartt1234@xxxxxxxxxxxxx> wrote:
> I've heard two school of thought on gasketing
> 1. Gasket the comb itself
> 2. Gasket the reed plates
> Who thinks which is better and why?
> Ryan
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
>
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
>