Re: [Harp-L] Gasekting

[Roy Germon <rgermon@xxxxxxxxxx>]

My naiive opinion is that it shouldn't matter.  A gasket really goes in between two parts to prevent leakage through the seam.  The gasket could simply be held in place by the pressure of the two parts rather than attached to either (as is the case with many automotive gaskets), and it should have the same effect.
 
rg

Ryan Hartt <rhartt1234@xxxxxxxxxxxxx> wrote:
I've heard two school of thought on gasketing
1. Gasket the comb itself
2. Gasket the reed plates
Who thinks which is better and why?
Ryan
_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxxxxxxxx
http://harp-l.org/mailman/listinfo/harp-l