GK amplifiers

[ah567@xxxxxxxxxxx (George W. Miklas)]

I have been toying with the idea of purchasing a keyboard amplifier
for the group.  The reason for a keyboard amplifier is that I can
get three channels, 100 watts, stereo chorus, and echo all in a small 
package.  I have entered a GK spec sheet into a file and have included 
it below.

Keep On Harpin'
George


Gallien Krueger
Keyboard Amplification Systems

200MK and 200MP Keyboard Amplifiers

These are the keyboard amps that are really going places.  Recording
sessions.  Live performances.  Rehearsals.  The 200MK Keyboard Amplifier
is designed to bring out the best your keyboard has to offer.  And it
gives you the flexibility you need for single or multiple keyboard
setups.  With unmatched sound.

POWER AND FLEXIBILITY

Fully-produced studio-quality sound with 100 watts of power.  A two-way
speaker system combining a 12" woofer and a 3.5" tweeter.  Mono input/
stereo output.  Built-in stereo effects.  Three channels, each with 
bass, and treble controls as well as individual chorus and echo controls.
A master limiter prevents power amp clipping.  And for a full 100 watts
per channel stereo, just add the 200MP Powered Monitor.

Both the 200MK and the 200MP can be mic stand mounted with the addition 
of an optional Mic Stand Kit.  And to keep your investment looking and 
sounding great, not to mentioin making it easier to take with you, fully-
padded Road Bags are available.

IN THE STUDIO

Record directly from the amp, in either stereo or mono with the balanced
outputs, while the built-in speakers let you monitor your output.

ON THE STAGE

Stereo or mono output goes directly to the PA  while you monitor your 
output.

IN THE REHEARSAL

The 200MK goes anywhere your keyboard can go.  And just as easily.  You
can always have yoru own special sound right at your fingertips.

SPECIFICATIONS

        Max Input:              1.5Vrms (200MK)
                                10Vrms (200MP)
        Output:                 100W into 4 ohms @ 1% THD 
                                72W into 8 ohms @ 1% THD
        Frequency Response:     <q1dB 20-20kHz
        Signal to Noise Ratio:  >80dB (referenced to max output power
                                from max input, EQ flat)
        Active Equalization:    q15dB @ 10kHz (200MK only)
                                q15dB @ 80Hz (200MK only)
        Limiter:                Fixed setting, non-switchable
                                (prevents power amp clipping)
        Input Impedance:        Input, 1M ohms
                                Monitor Input, 100K ohms (200MK)
        Speakers:               1x12" and 1x3.5" (passive crossover)
        Dimensions:             13.75"W x 15"H x 7.5"D 
        Weight:                 24 lbs
        Footswitch:             Controls Chorus (on/off) and Echo (on/off)

--
George Miklas


"Tap.....Tap.....Tap.....Is this thing on?"