[Harp-L] micro engraver for reed tuning

[Robert Hale]

Thanks!
that's exactly what mine looks like, too!

Robert Hale
Serious Honkage in Arizona
youtube.com/DUKEofWAIL
Robert at xxxxx

On Wed, May 29, 2019 at 4:57 PM Ken H in Ohio <airmojoken at xxxxx> wrote:

> Harbor Freight sells a similar Micro Engraver for $9.00 and you can
> always find a 20% off coupon.
>
> https://www.harborfreight.com/micro-engraver-98227.html
>
> Ken H in OH
>
> On Wed, May 29, 2019 at 7:44 PM Vern <jevern at xxxxx> wrote:
> >
> > Although it works fine for the tiny tip, you may require more torque to
> drive a Shotfu Brownie having a larger diameter. The next step up in torque
> has a plug-in power supply driving a somewhat larger spindle.  Still not as
> large as a Dremel.
> >
> > Vern
> >
> > > On May 29, 2019, at 4:05 PM, Robert Hale <ynfdwas at xxxxx> wrote:
> > >
> > > My Micro Engraver arrived and it works great!
> > > I practiced on old brass plates, raising and lowering reeds by 1
> semitone.
> > > So fast and easy!
> > >
> > > Monday I bought it for $8, today it is $14.
> > > Comes with ONE diamond tip (Not two as I thought) 3/32" shaft.
> > >
> > > There are lots of choices in this "micro engraver" category. You might
> shop
> > > around a bit first.
> > >
> > > https://is.gd/WiRSih
> > > or
> > >
> https://www.amazon.com/Generic-Brand-3241896-Diamond-Tipped-Ballpoint/dp/B006U9CN8W/ref=sr_1_1?keywords=Generic+Brand+3241896+Micro+Engraver&qid=1559170345&s=arts-crafts&sr=1-1
> > >
> > > Robert Hale
> > > Serious Honkage in Arizona
> > > youtube.com/DUKEofWAIL
> > > Robert at xxxxx
> > >
> >
> >
>