[Harp-L] Steel reeds

[Robert Hale]

I didn't mention, but do confirm supporting the reed with a shim so it
doesn't drop down thru the slot.

Robert Hale
Serious Honkage in Arizona
youtube.com/DUKEofWAIL
DUKEofWAIL.com


On Wed, Jun 6, 2018 at 6:30 AM, Joseph Leone <3N037 at xxxxx> wrote:

> I do the same. Scrapers rely on pressure. You have to apply anywhere from
> inch ounces to foot pounds to get the scraper (which should have a sharp
> edge like a cabinet scraper) to shave the reed.