Re: [Harp-L] Screws for MS Series

You can also use metric M1.6 10 mm screws, which are used in both the MS and the Crossover, Marine Band Deluxe, and Golden Melody. I've found that the American 0-80 thread is a compatible match for the M1.6.

Winslow Yerxa
Producer, the Harmonica Collective
Author, Harmonica For Dummies, ISBN 978-0-470-33729-5
            Harmonica Basics For Dummies, ASIN B005KIYPFS
            Blues Harmonica For Dummies, ISBN 978-1-1182-5269-7
Resident Expert,
Instructor, Jazzschool Community Music School
President emeritus, SPAH, the Society for the Preservation and Advancement of the Harmonica

From: Rudolf Nasahl <rudi.nasahl@xxxxxxxxxxxx>
To: Derwood <derwood.blues@xxxxxxxxx> 
Cc: Harp-l Harp-l <harp-l@xxxxxxxxxx> 
Sent: Wednesday, September 2, 2015 12:55 AM
Subject: Re: [Harp-L] Screws for MS Series

Hello Derwood,

You may try this link: 

Go back one step and you will be able to select any other MS series model like Big River, Pro Harp, Cross Harp and Meisterklasse.

I tried also to get them indirectly but had no luck over here in Austria and Germany

Regards Rudi

> Am 01.09.2015 um 20:14 schrieb Derwood <derwood.blues@xxxxxxxxx>:
> Does anyone know what the specs are for the reed plate screws for the
> Hohner MS series harps? I would like to try to purchase some indirectly.
> -- 
> Derwood
> derwood.blues@xxxxxxxxx
> verbis defectis musica incipit

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.