Re: [Harp-L] Marine Band Harmonica Repairs

RE: Anybody know what size screwdriver is needed to get the cover plates of a Hohner Marine Band Harmonica?

*Thanks for your replies - based on your suggestions it turns out that these are nails, or pins, that just look like screws, so levering the cover off with a thin blade is the solution.*

Since the Hohner Marine Band is not a cheap Harmonica I think this is a 'poor quality' issue since a single screw would work better than two dinky pins.

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.