Re: [Harp-L] Sealing wood comb
- To: Matt Rackerby <rackerby@xxxxxxxxxxx>
- Subject: Re: [Harp-L] Sealing wood comb
- From: Larry Sandy <slyou65@xxxxxxxxx>
- Date: Fri, 28 Feb 2014 05:27:28 -0800 (PST)
- Cc: "harp-l@xxxxxxxxxx" <harp-l@xxxxxxxxxx>
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1393594048; bh=nCq5yumQVXLsC6iMz0uFssGZxn8rsVAUIC7K2M3MgeA=; h=X-YMail-OSG:Received:X-Rocket-MIMEInfo:X-Mailer:References:Message-ID:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=5JLLzqyV2slFU4V6sg6iFbLGktkYT+9eZt/6G3KsmT0no5X3hk9VYi+r3QSVoNcFxTtjHVWc7id5Q65sUmmERxbm8UjuIhhwAVsg0KqxVfJKc6bEjEhk43nwgLNM5EVKogdtgOhQO/gC3LK/+Ym2B+tpwjYzr3PN0Fb1pdSjdM8=
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:X-Rocket-MIMEInfo:X-Mailer:References:Message-ID:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=f3iuLLsJP36+ooC/JusYH5w2AeaXsIpI5pO9TAdEZe7c7VLuVE8bka/81dds695KN4kMiASVoQbrM9ocgtQMNTI3pD6ptUJQrYZJtgcPE/3W2oxTgEvJtwr0GL1Fnel9tDrUUWcsM4pet/WNFmttLfNhUUjgmOlSCKWpQpvw6eY=;
- In-reply-to: <D088D64435DF47E8A5B11BA1797CE88E@MattCompaqPC>
- References: <003801cf3338$f30c2bc0$d9248340$@tampabay.rr.com> <D088D64435DF47E8A5B11BA1797CE88E@MattCompaqPC>
- Reply-to: Larry Sandy <slyou65@xxxxxxxxx>
Matt, how long is your second soaking (after flat sanding)? ÂI have used it but never soaked for long. ÂDoes it ever seep out, especially when it gets warm/hot?
Thanks
Lockjaw Larry
On Thursday, February 27, 2014 3:38 PM, Matt Rackerby <rackerby@xxxxxxxxxxx> wrote:
I agree, soaking something into the wood is better. Wood cells dry up after
the tree is cut, they are emptied of their moisture. They expand and
contract as moisture swells them or as they dry out and empty again.
Covering/coating the wood to create a thin barrier of something may
eventually fail if the barrier isn't thick or durable enough.
Try soaking wood combs in mineral oil for a week, rub off excess, and sand
flat. Soak again, rub off excess oil. Works for me.
Regards,
. __,---------------------------------------._
l\.<\...........Matt Rackerby.......\>\
\ \.<)______Visalia, CA_______)>\
.\ |___[]_[]_[]_[]_[]_[]_[]_[]_[]_[]___|
...... âââââââââââââââââââââ'ââââââââââââââââ'â..
-----Original Message-----
From: Tom Halchak
Sent: Wednesday, February 26, 2014 1:23 PM
To: harp-l@xxxxxxxxxx
Subject: [Harp-L] Sealing wood comb
I believe that sealing a wood comb is not about what you put ON the wood but
rather what you put IN the wood. Ideally you want something that will soak
into and be absorbed by the wood so that all the pores are sealed. In that
regard, I have been using Shellac. It is very easy to work with and has
been used for decades as a wood finish. It is all natural and has been
approved by the USDA for use in foods. In the past three years + I have
sealed over 1,500 wood combs with shellac and have had very positive
results.
Tom Halchak
www.BlueMoonHarmonicas.com
Clearwater, FL
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.