[Harp-L] Fixing harps



I have several Hohner chromatics that have a crack in the back. If I
 hold my finger over the crack just right I can get a clear tone,
 suggesting that filling the crack could restore the harp. Any
 suggestions on what to use?
   I also have diatonic harps that are fine but for one bad reed. I don't
 feel competent to solder on a reed (and the one time I replaced a Lee
 Osker reed plate, the result was not responsive enough to be useful), but
 does anyone recommend sending them to be repaired, and if so where?
   Thanks :-)
Steve Berman



This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.