Re: [Harp-L] First try at tuning (higher).. Advice?
- To: "Juke Geezer (aka Steve Hayes)" <bigbandrhythm@xxxxxxxxxxx>
- Subject: Re: [Harp-L] First try at tuning (higher).. Advice?
- From: gnarlyheman@xxxxxxxxx
- Date: Thu, 4 Jul 2013 20:24:19 -0700
- Cc: "<harp-l@xxxxxxxxxx>" <harp-l@xxxxxxxxxx>
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=references:mime-version:in-reply-to:content-type :content-transfer-encoding:message-id:cc:x-mailer:from:subject:date :to; bh=j4o/G3DLK/SEzfrawAo7O10QX4dk3F4u+S1ijLtWOcU=; b=gPYRJz73UiXwNalYa7GxWNk8b/uLOvbw/v5WIy15C030sylgeMiNnEKqYJnpyZ2eCT CRb/IVFwFTWcMAhKPRKVwwaQl8HmCUkyg6QoT71rHsfzeayikOqBRdmF07qjPh9L8YyB U5vQL7We/yhCIe3DqUp/k9v0baXaBoK/EgaibT5JoUMnMOMR9kiubGKvqLAiiqKIsVTT 317g3GE5isx/xBKitygArnpiHZFjAGeULlODLY2GGsE/LV8vRPNLFA+sTtIGDDBGlw2p MImDPR29zFBqexRXkSYGAx6XwCAw9dFkHue6scbfiuaK+1R0x+ESu/B8g0hulJDXy5Ih fcNg==
- In-reply-to: <8A501BC901BB44C6A9D2376A83BCBBB3@shayesHP>
- References: <8A501BC901BB44C6A9D2376A83BCBBB3@shayesHP>
I think you're going to have to replace some of those reeds. There are too tiny to raise by so large an amount.
Gary
On Jul 4, 2013, at 4:27 PM, "Juke Geezer \(aka Steve Hayes\)" <bigbandrhythm@xxxxxxxxxxx> wrote:
> Resending.. I had some email issues here..
> =========
> Iâm going to try my first effort to retune a harp sometime in the next few days.
>
> Iâll be using a piece of paper or manila folder to support the reed and a cut-down emery board as a file to do this to a Low F Manji:
>
> Tune change in half-steps:
> Blow: 0 0 0 0 0 0 0 0 0 0
> Hole: 1 2 3 4 5 6 7 8 9 10
> Draw: 0 0 0 0 +2 +2 +3 +3 +4 +2
>
> The intended result is a Steve Baker Special holes 1-10.
>
> I guess Iâll start with the 9 draw. Take a little brass at a time off the free end of the reed and keep checking pitch. It is a low harp and it looks like there is extra material for weight a the tip of every draw reed except 10.
>
> I suspect raising the 9 draw a third might be tricky. Also, because the 10 reed has no extra material to remove, I wonder if a scraper might be a better tool for that.
>
> There is a Harbor Freight store in town as well as the usual complement of hardware and building supply stores.
>
> Any advice?
> Tools?
> Technique?
> Mantra?
> Dietary supplements?
>
>
> /Steve
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.