Re: [Harp-L] amplifier question

Bill, It will work but it is not ideal.  It won't cause any harm, so
don't worry about that.  Try it and see how it sounds.  One problem is
that the line level to the second amp will change every time you
adjust the volume on the Weber.  You might get better results with a
signal splitter.

Does the Weber have two inputs?  I don't recall...  You can always use
the second unused input jack as an output to a second amp.

-Rick Davis

On Tue, Mar 20, 2012 at 10:28 AM, William Lifford, CP
<william.lifford@xxxxxxxxx> wrote:
> Hello fellow Harp-L'ers,
> This one is for the gear-heads out there....
> I have a small Weber kit 5F2H amp with a line out, as well as a Kendrick
> Texas Crude harp amp, built into a 4x10 reissue Bassman.
> Can I plug a cable from the 5F2H's line out into one of the four Bassman
> inputs?  Or will it cause harm?  I know nothing about electronic stuff and
> worry about ruining things by just plugging them in anywhere.
> Thanks,
> Bill
> William Lifford, CP Progressive O&P, Inc. 1111 Willis Avenue Albertson, NY
> 11507 516-338-8585

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.