Re: [Harp-L] Blu-Tak or Silver Solder - Staying within the lines

On Fri, Mar 2, 2012 at 10:51 PM, Robert Coble <robertpcoble@xxxxxxxxxxx>wrote:

> . If you don't use this (or some other trick), you might end up soldering
> the reed to the reed plate.

Agreed. I always place the shim under the reed before soldering.
Best soldering advice: Clean, Hot, and Quick.(as in Brief)

Robert Hale
Learn Harmonica by Webcam
Low Rates, High Success <>

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.