RE: [Harp-L] Reed Tune-A-Matic

["Jim, \"Turbodog\" Antaki, \(PhD\)" <turbodog@xxxxxxxxxxxxx>]

Thanks, George - yes it can work on any of the reeds.
 
TD
 

  _____  

From: George Miklas [mailto:harmonicat@xxxxxxxxx] 
Sent: Wednesday, February 01, 2012 10:58 PM
To: turbodog@xxxxxxxxxxxxx
Cc: harp-l@xxxxxxxxxx
Subject: Re: [Harp-L] Reed Tune-A-Matic


Interesting!

This could definitely be useful to chromatic players.  Could it be applied
to both blow and draw reeds?



On Wed, Feb 1, 2012 at 10:49 PM, Jim, "Turbodog" Antaki, (PhD)
<turbodog@xxxxxxxxxxxxx> wrote:


Friends,

While fooling around with the "TurboSlide" harmonica - the one that uses
magnets to bend the pitch, an idea came to me.   Whereas the Seydel version
can bend up to 1-1/2 steps, I was hoping to achieve the same effect by
modifying a brass-reeded harp.  (By modified, I mean that I add a small
patch of magnetic paint to the underside of the reed.) But I was barely able
to get 1/2 step bend. Then it occured to me: why not use this effect to
provide fine-tuning, and thereby obviate the painstaking and reed-damaging
filing operation.

(In engineering, this is an example of the precept, "If you cannot fix it,
feature it.")

In other words, I could equip a harmonica with a tuning screw that would
provide continous pitch adjustment - like the tuning head of a guitar, for
example.

So my question to you - would any of you use such a feature? And if so,
which reed(s)do you most frequently find in need of fine-tuning?  And would
50 cents (1/4 step) make it worthwhile?

Thanks in advance for your constructive feedback.

Turbodog