Re: [Harp-L] Free reed tuning tool

On Jan 29, 2011, at 12:35 PM, Gary Lehmann wrote:

These strips also work well to support a reed while adding solder to the
tip--better than a razor blade, less of a heat sink (thank you Joe Leone!).

You're welcome Gary. When applying solder, I use a thin piece of mica (from an old toaster). Try that. It's swell.

Skippy D. Deaudaux

On Sat, Jan 29, 2011 at 6:00 AM, Michael Easton <diachrome@xxxxxxxxxxx>wrote:

Over the years I've seen harpers post uses for security tags you find on
cds and other products.

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.