[Harp-L] Re: RP-255 "UPDATE" (problems going thru PA)

[Blueharp1@xxxxxxx]

I use the RP-255 all the time into standard P.A., no problems whatsoever.  
1/4" cord runs from the "LEFT(Mono) OUTPUT on the RP-255,    and goes into 
the 1/4" input on any P.A. channel. 
 
*** Are you making sure to press IN the  "AMP/MIXER" button (right next to 
the "LEFT(Mono) OUTPUT" on the RP when you're  playing through the PA?     
It has 2 positions: The button  is OUT if you're going to an AMP. The button 
is IN if you're going to the Mixer  (P.A.). 
 
 
 
In a message dated 2/6/2011 2:10:02 P.M. Mountain Standard Time,  
harp-l-request@xxxxxxxxxx writes:

Message:  11
Date: Sun, 6 Feb 2011 16:08:18 -0500
From: 46long Blake  <46long@xxxxxxxxx>
Subject: [Harp-L] Re: AAaaarrrgh! - P 255!!!!!  *UPDATE*
To: 46long@xxxxxxxxx, harp-l  <harp-l@xxxxxxxxxx>
Message-ID:
<AANLkTik=1Wd=q+nJbE-F_xGCRq_R97rE4BqN6ZgvBi+-@xxxxxxxxxxxxxx>
Content-Type:  text/plain; charset=ISO-8859-1

So I hooked up my harp mic through the  rp255 into my son's amp today. It
worked perfectly. This tells me that the  problem is in playing through a PA

My musical partner-in-crime glibly  says, "I told you, that thing is 
designed
to drive an amp - not a  PA."