[Harp-L] Anyone sand the perimeter of their Crossover combs?
- To: harp-l@xxxxxxxxxx
- Subject: [Harp-L] Anyone sand the perimeter of their Crossover combs?
- From: Mike Fugazzi <mikefugazzi@xxxxxxxxx>
- Date: Thu, 3 Feb 2011 15:12:31 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:from:date:message-id:subject:to :content-type; bh=L1sJPLFq5P9Seilx6X4ou+itUmEJqDVmcIMEi7a1pqc=; b=pbK+sJUE2BGe1Zb+pRn+kcly3rO10WocmuwQOyzZytww4rjoLVuxIpc+oFt6I10+u3 XTh+XX0L0snirbZGgEfujeDuXLJXiFBK9YNLML6Wr1v0YiX2r438Gvs+z02wFjjZ3dz7 1JZkFUsb2EHdwr61KYq9bVk0VXeXX7asAiIco=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:from:date:message-id:subject:to:content-type; b=sLuGoc9FWhN68cpnxFDkWwLr//gIUDGMJ4/QvEe4QiLzZKcget1/pX9mgdQBe6NcWP JVYZNeCUrJG7Spre8WDBA1H44RJO/P7iEF+apzgB0aW34n2B2lIbExJkGdPiZHqlW4N1 gJM+TMvU6junS5XXySsMTHIJzhWzVedFwKsC4=
I've been flat sanding the combs and making sure they are sealed, but I have
been nervous to sand the perimeter. I guess I was concerned that the
shellac would pick up some of the dust and become discolored.
Anyone mess with sanding bamboo? Resealing/shellacing isn't an issue. I am
just curious if it turns out nice like dymonwood. I've been waiting for
someone to offer replacement combs (just in case), but no luck so far. I
have some Sjoeberg combs coming that will fit the Crossover and might
sacrafice a few combs at that point. I hadn't felt the need until someone
asked if I would do it for them.
Thanks.
----------
Mike Fugazzi
vocals/harmonica
http://www.mikefugazzi.com
Facebook <http://www.facebook.com/MikeFugazziMusic>
Quicksilver Custom Harmonicas
<http://www.mikefugazzi.com/fr_customharmonicas.cfm>
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.