[Harp-L] Blu-Tack and Solder WAS: Optimized Blues Tuning
- To: "harp-l@xxxxxxxxxx" <harp-l@xxxxxxxxxx>
- Subject: [Harp-L] Blu-Tack and Solder WAS: Optimized Blues Tuning
- From: mik jagger <harpomatic@xxxxxxxxx>
- Date: Thu, 11 Aug 2011 12:09:39 -0700 (PDT)
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1313089779; bh=fFscwFgj1aPXofIWex43uDZOBHaWhuPqnUwylqkdlos=; h=X-YMail-OSG:Received:X-Mailer:Message-ID:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type; b=5fMm9H5dlb11puQwoyN0GSJzfptxVZcHj3u8/2Z8/pxjh9fCuoZ2HUKmnjxaoc9uws6rDjsP3xv3MuwlD7E9cfrdzfL19C92wJaELp42akjN4uc0Bgush1Bdwf4sBUmM6DZj6GJ61wlBTq17lsm5K/WvKhYOp4CX8wXMV1z6xLw=
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:X-Mailer:Message-ID:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type; b=cTsrj3XszmzQVuzMF+TBPgO3kbv2aPCMBOS5v8ifnIQhk+j4xDSMV1gxtW3ScXfrvXDucRgoBHyYDspJulTfuoaTRsaojuBUqnFJN14l3sG5v+rGfSW0BU0W0AzZBsRLQHAEWmZx17RZuhe5RVb9L1n82CYCxRFNF1UD7Feu+l0=;
- Reply-to: mik jagger <harpomatic@xxxxxxxxx>
Richard, I had some success with effectively shortening the reed by firmly gluing or soldering both, reed and reed-slot at the rivet end, but deeper/further away from the rivet, in the direction of the tip of the reed. This way, you shift the rivet/root down, shortening both the reed and reed slot, making it go higher.
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.