Re: [Harp-L] SPAH 2010 Comb Test: a thought experiment (long)
- To: harp-l@xxxxxxxxxx
- Subject: Re: [Harp-L] SPAH 2010 Comb Test: a thought experiment (long)
- From: Michelle LeFree <mlefree@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 02 Sep 2010 20:34:48 -0600
- In-reply-to: <201009020219.o822JHk4020169@harp-l.com>
- References: <201009020219.o822JHk4020169@harp-l.com>
- User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.8) Gecko/20100802 Thunderbird/3.1.2
joe leone writes:
<huge clippage>
What I was trying to say here was that while the sound may SOUND the
same to listeners, the FEEL of the sound may FEEL different to the
player. It could be the vibrations?
<Even more clippage>
Good, good, good vibrations. Interesting you should mention them Joey,
because I have been thinking about them a lot lately. I think this
phenomenon of harps vibrating differently in a player's hands and mouth
can shed light on our ongoing discussion about the comb experiment.
Here's why:
I play wood, plastic and metal combed diatonics (different temperaments
for different genres, mostly). I don't ~think~, I ~know~ that when I
play my Suzuki Promasters -- that have aluminum alloy combs -- I can
without question ~feel~ those harps vibrate in my hands and mouth to a
significantly greater degree than I can feel vibrations in harps with
combs made of the other materials, wood or plastic. I think there is
information in the fact that different harps vibrate differently in the
hands and mouth of the player and that such information bears directly
upon the questions asked in the comb experiment.
I'm not a real acoustical scientist by any means and I don't even play
one on TV, but I have solved many acoustical boundary value problems
(differential and partial differential equations). I can say from this
experience that materials have characteristic acoustical impedances just
as they have characteristic electrical impedances (resistance,
capacitance and inductance). Materials with low acoustical impedance
transmit acoustical vibrational energy where materials with high
acoustical impedance absorb it. Sound wave reflections occur at
boundaries between materials of different acoustical impedances (much as
in physical optics). The higher this difference in acoustical
impedances, the greater the amount of reflection. (As examples, foam
rubber would have high acoustical impedance, where steel would have low
acoustical impedance. That's why you see that egg-crate foam lining
recording studio walls.)
With this technical underpinning, here is a little thought experiment.
Another way of looking at this physical phenomenon of acoustical
reflection is to understand that if one material is absorbing acoustical
energy and another is reflecting it, the amplitude (loudness) of the
reflected sound waves will be greater in some way with the reflecting
material than the absorbing one. Makes sense, right? So one might then
ask how two harps, one with its comb made of a "reflecting" material and
the other of an "absorbing" material (unnamed in this experiment) would
feel in one's hands? Could it be that the one that vibrates more
strongly in the hand would have a comb that is absorbing less acoustical
energy and vice versa? I think so.
I posit that the harp with a comb material that doesn't absorb
acoustical energy transmits more vibrational energy to the player's
hands and mouth than a harp with a comb that ~does~ absorb acoustical
energy (and likely to a listener as well but let's stick to analyzing
what the player feels). Hard to argue with that. If you feel one harp
vibrating in your hands and mouth to a noticeably greater extent than
you can feel when playing another harp, it is intuitively obvious that
the lesser vibrating harp has done ~something~ with that acoustical
energy that you ~aren't~ feeling transmitted to your hands and mouth.
Yes, folks, I am saying that that harmonica somehow ~absorbed~ that
energy. And since the other components (reeds, reed plates, cover
plates) are the same as the other harp it must be the comb that did the
absorbing.
I hope you are with me so far if you are still reading this. What I am
saying here is that, from a purely theoretical view, based on the
different levels of vibration a player feels in their hands and mouth I
believe I have informally proven that the sound exiting two harps, one
with a sound absorbing comb and the other with a sound reflecting comb
~must~ be different in some way. I further contend that the inherent
differences in the acoustic properties of comb materials must cause some
sort of a filtering effect (whether or not frequency-dependent) in which
the frequency spectrum of sound emitting from harmonicas with different
comb materials are different in ways that are characteristic of the comb
materials.
I fully realize that this idea is in conflict with Vern's long-standing
position. His argument that the wavelength of the sound a harmonica
produces are much longer than the dimensions of a reed chamber and
therefore the comb material can have no effect on the transmitted sound
seems to hold water. Yet, how can this clear difference in how harps
vibrate in the player's hands and mouth ~not~ bear some sort of a
relationship with the sound emitted out the back of the harp?
These are the musings I think about when I try to reconcile my
real-world experience playing and listening to harmonicas with my
admittedly limited experience with acoustical dynamics in air. [My
experience is almost all to do with studying sound waves in a (mostly)
water-equivalent material (i.e. diagnostic ultrasound of the human
body).] I would like it very much if Vern or anyone else can explain to
me how one harp that feels like it nearly comes alive in your hands
could ~not~ produce a different emitted sound compared to another with
which the body of the instrument vibrates noticeably less. I'm not even
saying at this point just how the two sounds might differ, but that they
must differ somehow (though I have my ideas). (BTW, no one will convince
me that those aluminum-combed harps don't vibrate much more in my hands
than a wood or plastic-combed instrument so don't even try.)
Now whether these differences in the sounds emitted by a harp with a
more reflecting comb material and one with less reflecting material are
detectable by the human ear or not I don't know (I personally ~think~
that they are). But my gut tells me that spectral analysis of the
recorded sounds from those different combs will show some kind of
differences. I'm looking forward to learning when the results of the
analysis of those spectra will become available, and what kind(s) of
analyses were applied.
At least that's the way I see it. I'm sure Vern (and probably others)
will "feel" differently. ;-)
Michelle
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.