[Harp-L] Juke Coda 810 H with reverb and vibrato/tremolo on Rt.66
- To: Harp <harp-l@xxxxxxxxxx>
- Subject: [Harp-L] Juke Coda 810 H with reverb and vibrato/tremolo on Rt.66
- From: B Boggs <ceudoazul@xxxxxxxxx>
- Date: Sat, 30 Oct 2010 14:26:45 -0700 (PDT)
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1288474005; bh=Gm0u6j2CcqvTeOi9JWl3N7NyZ+2j7gnRzwmo4X9tNBw=; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type; b=cxn7uJyNfvgocEMSZrlS7geHK87zJR0bIADzrQx0qCS5TgO5taw+CiNEBlBRF4vJ8oTmAOyPDwOWgsbwiouVfAqLAFUz0ptCbTWU/uUGBTRglp6Y/KiikVRpkI+dHnSgmhEgYVcLFtMBIxHm7FBcsGahkpvcoBVaesNmeC8iXbY=
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type; b=MCELUaJhGAWDYMEAS0KFnf1OgbEUCBhHIbI2GsP6PTh8zSbIc5KqE1Qvn0j5b5b6Lu5YmSa0s3HBNemqYw4zZIHW7wAMef4X1yeDVfmNJ2M87qoX6vptzHmvcQoOdSctxb4TVlKSMKZz988BMQAF7y5m2REW2CP0t8dSgrPIJqs=;
Hello,
A very interesting amp.
It has two 5881 output tubes.
A switch on the chassis changes the amp from triode (22 watts output) to pentode (40 watts output) operation.
For several nights I used the lower power and it was as loud as needed for a three-piece and the last night with a drummer, I switched it to pentode (40 watts) and it cuts through in the mix.
It sounds different then Fenders and is clean with Magnatone vibrato and Fender tremelo interactive with Ampeg style tube/spring reverb.
It has a Valco sound in it which comes from the hybrid circuit.
It weighs 40 pounds and is smaller then my Cruncher and seems as loud.
A ten inch Jensen AlNiCo and two Weber ceramic speakers in a very well built cabinet.
Point-to-point, hand wired- beautiful covering.
Oh, yes.
It has a 4-ohm speaker output jack.
I am liking it.
The owner- builder sells direct and has a web site at jukeamps.com
Best,
Brian
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.