[Harp-L] Killer mics for sale Sonny Jr.

[SONNYTONE@xxxxxxx]

I am loosening up my high quality personal stock which has taken me many  
years to find such great controlled magnetic elements that are installed in 
JT30  shells with stock exterior, but here is the good stuff. I have been  
searching for the best low z 14.6 ohm controlled magnetic 99C elements,  which 
I then use a Shure correct stock transformer to make them high impedance,  
1K or above. I have a 1950's 3 digit and two super hot early 60's that were  
chosen for their huge bottom end, yet still carrying a true, pure sound. I 
used  line cord weather stripping to be able to keep the element directly 
onto the  face of the grill, using my own technique for keeping them solid, no 
one has  ever in 20 years complained that one came loose. However you can 
just take  them out if needed with no problem. No epoxy, silicone, or 
anything that will  make a mess if you decide to have exterior work done. My 
favorite volume pots  that click on each number so you can know just where you are 
at and it will stay  there, a plus when using the Cruncher which likes to 
run at nearly full speed,  then just back off on the mic and the tone will be 
exactly the same, just less  volume.. Amphenol connectors with adapters 
included, which two have. One has no  volume pot so a Greg Heumann in line 
volume control was installed. They gave a  sound similar to a cross between a CR 
and CM, with loads of bottom end, yet  still robust. If you think the 
Turner shells are too small, these will fit  perfectly in your hands. These are 
my best, and with prices where I see them,  for $275 per mic plus shipping 
extra, you will not be disappointed. You can  trust what I say is what it is.. 
 
On another note, I have a customer who I have been doing business with for  
many years who due to financial issues needs to sell his brand new 
Cruncher,  listing for over $1400 plus cover and shipping. It was never used except 
for  initial notes blown through it at the house when receiving, Mojo will 
pack it  for him, the cover will be put on then the whole package goes in a 
large bag so  nothing gets to the amp. Then blown foam is shot into the box 
which has handles  for grips to help out the UPS people. I trust him to the 
point that I will  warranty the amp for two years on the circuit, one year on 
the speakers. It has  Groove Tube middle grade highest quality GED-M GC's, 
stock speaker setup of 12"  Weber and two different 8" Webers, one for lows, 
one for highs.. He wants  $1175.00 which is another steal plus $65 for the 
padded tuki cover and the amp  will be professionally packed by Mojo as he 
lives in North Carolina. I will need  to know who the person is that buys it 
to record an invoice and have the start  date of the warranty. You will also 
receive two extra preamp tubes, one for  higher gain, one for very small 
rooms, lower gain, plus a 6 inch patch cable and  a comprehensive manual where 
everything is explained concerning set up in the  first 4 pages; it has 5 
different possibilities for plug in set up, the tone  controls must be 
followed for best results. Thank you. Sonny Jr. 
Contact    _thevinoking@xxxxxxxx (mailto:thevinoking@xxxxxxx)      Scott 
Nickerson  if you are interested.