[Harp-L] Wireless set ups

[Greg Heumann <greg@xxxxxxxxxxx>]

Michael -

There are many solutions. Depends on what you have. Are you talking  
about a later JT30 or BluesBlaster with built in XLR?

If so:

1) I can make an impedance matching adapter, XLR Hi to XLR Lo  
specifically for this purpose

2) I can also install an impedance matching transformer inside the  
shell of the JT30 and rewire the XLR connector so it is low impedance.

If you're talking about an older JT30 with a screw-on connector:

3) I can make an impedance matching adapter, screw-on hi to XLR Lo  
specifically for this purpose

4) I can also install an impedance matching transformer inside the  
shell of the JT30 and fit an XLR connector.


Please contact me off list to discuss further.

/Greg

http://www.blowsmeaway.com
http://www.bluestateband.net
http://itunes.apple.com/us/album/duracool/id343874731






> From: "Michael D'Aurizio" <mdaurizio@xxxxxxxx>
> Date: March 2, 2010 3:35:00 PM PST
> To: harp-l list <harp-l@xxxxxxxxxx>
> Subject: [Harp-L] Wireless set ups
>
>
> Hello all,
>  I was watching some Jason Ricci you tube stuff a while back. I  
> noticed he has a wireless transmitter that plugs into the XLR  
> fitting on the bottom of a stick mic. Does anyone know if you can  
> set up a JT30 with an XLR so you could use that same style wireless  
> transmitter on the "bullet" style mics? Or maybe some sort of  
> adapter to go from XLR to 1/4 inch?? Thanx in advance for any advice.
>                   Mike
>