[Harp-L] Special 20 screws....?



I know that special 20 screws are M2, and they also are Pozidrive.  The curious thing is that if I replace one of the factory screws with one of my 2mm stainless steel screws that I normally use, the hole is too big and the screw will not catch.  They work just fine on the untapped extra special 20 holes.  I really do not know the reason for this.

Harvey Berman


This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.