Re: [Harp-L] harmonica terminology

["Doug" <mr4chnt@xxxxxxxxx>]

Nothing wrong, except that I'm trying to describe in a document various existing and proposed mouthpieces, and there are holes every where!  For example there are holes in the slides, holes in the stationary parts of the slide assembly, holes in the back of the mouthpiece (when it is off and being described apart) and holes in the front of the comb assembly when the mouthpiece is off, as well as the holes on the front.

I'm probably going to have to introduce some terminology just to make sense of it, so I'd thought I'd use whatever is already in use, or if I have to invent, do it with the benefit of expert opinions.

(Maybe I could just use French for one type of hole, Spanish for another, or Latin maybe?)

Doug H

  ----- Original Message ----- 
  From: hazcon 
  To: Doug ; Harp L 
  Sent: Saturday, January 23, 2010 8:32 PM
  Subject: Re: [Harp-L] harmonica terminology


  ???
  If it walks, talks and looks like a hole.........it is a...hole
  What's wrong with that?
  Rick

  ----- Original Message ----- 
  From: "Doug" <mr4chnt@xxxxxxxxx>
  To: "Harp L" <harp-l@xxxxxxxxxx>
  Sent: Sunday, January 24, 2010 16:17
  Subject: [Harp-L] harmonica terminology


  I am wondering if there is a more refined term in use than 'hole' to 
  describe where we huff and puff on a harmonica, especially in reference to 
  the chromatic or other harmonicas with a mouthpiece.

  Or if there is no good term in use, do you have any suggestions?

  Port, vent, aperture, opening, channel ???

  Since I'd be very surprised if there are no suggestions . . . thanks in 
  advance!

  Doug H
  _______________________________________________
  Harp-L is sponsored by SPAH, http://www.spah.org
  Harp-L@xxxxxxxxxx
  http://harp-l.org/mailman/listinfo/harp-l 




------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 9.0.730 / Virus Database: 271.1.1/2640 - Release Date: 01/23/10 00:33:00