Paul, Some of the early versions of those mics have brass screws that might
be found at a hobby shop that sells model railroad/airplane supplies. If you
live somewhere that you have access to a commercial fastener supplier they
should be able to match something up. James
----- Original Message -----
From: "Paul Routledge" <paulandrewroutledge@xxxxxxxxxxxxxx>
To: "Harp L L" <Harp-l@xxxxxxxxxx>
Sent: Saturday, January 16, 2010 4:07 AM
Subject: [Harp-L] Re: Harp L Looking for Astatic T3 mic screws
Taping them out for new screws is not a bad idea Michelle. Thanks for the
advice.