Re: [Harp-L] Archive search

[joe leone <3n037@xxxxxxxxxxx>]

On Feb 1, 2010, at 11:00 PM, Dave Minson wrote:

> Can anyone tell me how I might get to some of those threads  
> discussing attaching reeds to reed plates with screws, sizes,  
> sources, etc?  I tried to search the archives and came up blank.   
> Thanks.
> dave
> _______________________________________________

Dave, you will need a .0090 tap, a (small) 82 degree countersink, a . 
0090 nut driver, .0090 x 1/8" machine screws, and .0090 nuts. You  
will also need a wire gage drill. I don't recall the size (diameter)  
right at this time.
smokey-joe