[Harp-L] reed rattle

["Randy Sandoval" <randyharps@xxxxxxxxxxx>]

Hi Seth,
If you have a Harbor Freight near you see if they have a dapping block in stock. Its a brass or aluminum block with dimples
of varying sizes on all sides. Place this on the top of the cover and put the die on the other side and tap with a plastic mallet.
It makes a nice pro looking dimple. Maybe get a cheap set of dial calipers while your there to  get an accurate measurment
from the end of the plate to the offending reed. The only drawback is the bump can be felt when playing.
Randy
www.genesisharmonicas.net