[Harp-L] amp overkill
>From my first amps I sold almost 20 years ago that were PA heads or stereo
console heads in a cab with different variations of speakers, I always went for
Tone first, then made sure the volume was loud enough if you wanted to hear
yourself on stage a bit as a monitor. I have used tube substitutions, not
because I can't trick out a circuit to have less feedback, but because it gave
the customer the power and the knowledge how to get that best sound in every
situation. And just by mic'ing the amp, you get the purest tone amplified,
rather than a far too loud amp on stage that is mic'd. I watched Lightning
Hopkins as I played with him and his band in Japan direct the dynamics of the
band, THAT is what blues is. DYNAMICS. And as soon as the harp player's amp
starts getting to that over the top level, the rest of the band is coming up and
over, so essentially you end up in a volume pissing match with your band.
I have had my own band for 10 years and was in a high energy band
called the Delta Blues Band for another 8 years, so I know what it is like to
be drowned out, and that comes from everyone not being on the same page volume
wise. I would rather have the guitar player and bass player ( preferably
stand up bass ) lower on stage and mic them, so everyone is at an even keep with
the ability to come up for a solo without the rest being so loud you can't
hear yourself no matter what. I went through the over 2000 vintage 1950's amps
to know and hear what tone was available, and what everyone would want: An
amp that responds to the lightest of touch, yet can be crisp, or overdriven,
just depending on how it is set up and the technique of the player. Now with
both my amps being able to by so many owners descriptions have all the volume
they need if they want it, it makes it more appealing for the rest of the
band to hear you with fat tone at a nice volume level, that they are more
willing to not turn up as they usually do, and take your suggestion to have a real
blues band.
I have stated this before, in my early production days I had
a 30 band Sabine Feedback Eliminator that would red light the frequencies
that were causing feedback. I discovered yes I could get really loud, but to me
not at the expense of those juicy frequencies. So I just tell my 410 owners
to keep the middle control at TWO, this will cut back feedback by 100%, and
use the treble and presence, plus bridging the channels and using the bright
control to also have maximum projection. Of use one of the many possibly
preamp tube setups you are given the tubes for and experiment on your own to see
what you like best. From the thousands of harp players I have encountered over
these years, 99% of them want THAT sound, and I know what it is, can create
it, and will always have tone plus volume, not the other way around.
As I do not list my prices, and there is a reason for it which will
take too much time, I will let everyone know the Cruncher is $1595 and the
410 is $1795, both include the package of spare rectifier and fuse ( in case
rectifier dies on a gig, amp will go lights out , just keep this with you,
never have to play through the PA just because of this common occurrence ), two
preamp tubes to make subs for any room situation, a patch cable so you can
bridge the channels, and a 10 - 12 page color illustrated manual describing all
the tube gains, various tube setups and what will happen sound wise with
each, and my lifetime customer support. I would still happily help anyone that
has bought one of the more than a thousand amps over this period.
On the amps, the padded Tuki cover is extra like the other companies do, and
so is the shipping, sent out in our custom blown foam padded boxes with
handles on the side, only one claim in 17 years, and not our fault, the amp was
paid in full and customer got a new amp.
The more I listen to the pros, and all the years watching or with
Sonny playing with or opening for so many of the greats, it was not like some
of these harp players that just have to be louder than two guitars. It really
does not have to be a fight if they can understand the final outcome.
Please note that I now have developed an even darker, richer tint
followed by my patented clear coat formula that ends up like glass. If anyone
is still using paint on tints like Minwax, the tweed will feel rough and not
as protected, as brush on clears cannot get as hard as the one we have which
takes 4 coats with a light sand inbetween each coat. I pay top dollar to have
my cabs done this way, but to me and everyone who owns one, it is worth it.
Thank you. Sincerely, Sonny Jr. PS. I have a couple of live Charlie
Musselwhite clips that must be sent to my webmaster to put up on the site. Thanks to
Gregg Heumann's advice, I bought a Roand Edirol R-90 unit for recording my
endorsers when I see them or myself for new clips. Great machine, got it off
Ebay for a hundred less than the $349 new price. Thanks Gregg and to all who
have emailed personally to wish me well. Sorry for the length, it is a subject
I just needed to get out of my system. I am sure everyone has their own take
on it. That is why I have a special line out system that gives the closest
speaker sound I have ever heard. I have not heard any of the new amps yet so am
just speaking for my own. When using the line out AND mic'ing the main
speaker you get a whallop in the house and monitors, and your amp is still nice
and cool volume wise on stage. That's a good night. Lord knows how many "What
did I play" nights I have had in my career. My goal is that does not happen to
you. Sincerely, Sonny Jr.
**************From Wall Street to Main Street and everywhere in between, stay
up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023)
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.