Re: [Harp-L] Cable Connector Available ?



One standard (Radio Shack) 2-way connector...two females and one male... will do it.

Plug a 2-way connector into one amp.
Plug a cable into that 2-way connector and into the other amp. This connects the amp inputs together.
Plug the Mic into the other socket of the 2-way connector.
Now the mic and the two amp inputs are all connected together...assuming that's what you wish to do electrically.


This works because the electrons don't care which way the male jacks are pointing. ;o)

Vern


----- Original Message ----- From: "Ken Hildebrand" <airmojoken@xxxxxxxxx>
To: "harp-l" <harp-l@xxxxxxxxxx>
Sent: Wednesday, April 15, 2009 1:14 PM
Subject: [Harp-L] Cable Connector Available ?




Is there a cable connector available where you can connect 3 guitar cables (all with 1/4" male plugs) together to form a "Y" cable, so you can have a mic cable connected to two amplifiers ?


The connector would basically have one 1/4" female connector on one end, and 2 1/4" female connectors on the other end.

Ken H in OH



_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxxxxxxxx
http://harp-l.org/mailman/listinfo/harp-l





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.