[Harp-L] Re: Holes suddenly hard to draw and blow
- To: harp-l <Harp-L@xxxxxxxxxx>
- Subject: [Harp-L] Re: Holes suddenly hard to draw and blow
- From: JohnnieHarp <johnnieharp@xxxxxxxxx>
- Date: Tue, 14 Apr 2009 10:37:33 -0700
- Cc:
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:date:message-id:subject :from:to:content-type; bh=GacYlIiQibuL5PiV/UvDsukbXXXp/fPi2JNJY+6y60k=; b=hJtWvg5XN2SCPDWF41TX9OKdWSGG6nHcc9erVvCzm5MNU0upMKOLFuDfJrePsAUuPp TMctk6p9V3vIZAEp+jjlDaeO40UEHCbA7mpEmtgJQhLY49oH02JV/kGzG9SivM/yhxkC HZQas4ZBLAydhFzJR8ywhkryET+sXypRy42Hs=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=KtJfdTYo7F2b5OUyqlxbR2yjiF2pGZ0N+0dB2reYXxrJjj87SG9/sqVN97b2dPgtPQ i4RQq/OLQW2X41iYBMp1EDzMstxaocjRckAXT66Hyzhd+smowN6R4t9K1yd4uXKUfYX3 IE4UXPWW8zXhC0kiJvkl6R9oleBNkaSVNRfpA=
> What is "rivet end tuning"
By this I meant, when reed material is removed near the rivet to lower the
pitch of the reed during final tuning at the factory. I've found quite a bit
of variability in the degree of this between harps of the same key and model
bought at the same time.
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.