Re: [Harp-L] stacking harp amps
- To: <harp-l@xxxxxxxxxx>
- Subject: Re: [Harp-L] stacking harp amps
- From: "Splash" <celtiac@xxxxxxxxx>
- Date: Sat, 11 Apr 2009 14:26:22 -0400
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:from:to:references :subject:date:mime-version:content-type:content-transfer-encoding :x-priority:x-msmail-priority:x-mailer:x-mimeole; bh=rg1+GNTniSpfdIQ0FLDeLDH+0Kk49H0H71vqmWZtX1I=; b=qMpV4rk6INsMo2DfA3O9OqQPgfz0nXkFcLgdaaNloYDQ+vlCBCQDxt0ab32nkkEBVb dvk2qtuC8YpQkux+6RMr407nx0DAASZe2vxJgLg0i2QHlsLpvxFqZZapRmoSJsKiGHWW xbeZYgok7g8e3GC/FwGL2T9gE9ET7Q9CtMXJM=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:from:to:references:subject:date:mime-version :content-type:content-transfer-encoding:x-priority:x-msmail-priority :x-mailer:x-mimeole; b=B1IRwtJW3yvIfmLsV7Ze/dW2IO2VioQxFk/ixDEK3DceWc3DYOK41J9gCRKmVK/BO3 u8HiuptpU+q6NyVWybAlZuxKqC6fLkugUvtq3h4Wl9Mn1fcOvHz5kjqgs0G4MEwvKCHI fUQl/CJSWXy4tA++jEdpEKRemG6bpLPKzPfKI=
- References: <E97A44F3-B4B6-4018-B9A6-20B7ECA3DDF5@mac.com>
A quick Google found this:
>From "Lord Valve" line-out for a champ, or any other single-ended amp
quote"put a 1.5K resistor in series with the output, and
use a 150-ohm resistor to ground right after the 1.5K. Output
is taken from the junction of the 1.5K/150-ohm network. If you
want adjustable output, put a 50K pot in parallel with the
divider network and take the output from the wiper." ---end quote
Torres makes a kit.
http://www.torresamps.com/simple_amp_mod_kits.htm
Actually, the easiest way to stack amps is to plug your mic into input one
on the first amp, and then run a cable from input 2 in the first amp to
input 1 on the second amp. Or if you want the second amp to have more of
the signal. plug into jack 2 on the 1st amp and cable from jack 1. There is
usually more "R" in jack 2.
Splash
----- Original Message -----
From: "John Hegedus" <johnhegedus@xxxxxxx>
To: <harp-l@xxxxxxxxxx>
Sent: Saturday, April 11, 2009 1:55 PM
Subject: [Harp-L] stacking harp amps
> Can anyone tell me how to stack harp amps for a better sound like Mark
> Wenner's rig? I have a Silvertone 1481 and I want to hook it up to a
> bassman. I like the sound that the 1481 produces but I would like it
> louder and not quite a dirty as the 1481. The 1481 does not have a
> line out. Any info would be greatly appreciated. Also, how is my
> buddy and one of the greatest harp players in the Pittsburgh area
> (Frank Franz) doing these days doing?
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.