[Harp-L] Shure 545 unidyne III



John wrote:
Can someone tell me a simple way to change impedance from low to high  
on a Shure 545 unidyne III ?

See the following post from last month by Steve Warner, owner of thunderharpmics.com:

simple......open up the connector and look for the little black plug with 2wires attached.  Gently unplug it and turn it 180% and plug it right backin.  The white wire shoud be the HiZ lead.  Enjoy the new found explosive output!!!!!steve - www.thunderharpmics.com

ron - FL Keys






This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.