Re: [Harp-L] lightweight microphones

["john" <jjthaden@xxxxxxxxx>]

My guess: A female 1/4" bulkhead connector would leave a hole when not mated to a cable, an air leak when mated.  



======= At 2008-06-01, 08:10:06 you wrote: =======

>Why fit the shell with the switchcraft connector and then hack on a 1/4 
>adapter?  Why not just fit the shell with a 1/4 plug directly?
>
>John
>
>Chris Reynolds wrote:
>> I've been playing around with making a lightweight microphone and I now have a page up on my site about it, the finished weight of my mic was 5.4 ounces. 
>> http://www.builderofstuff.com/micsforsale.html
>>
>>  Chris 
>>
>>
>> http://www.blowyourbrassoff.com
>> http://www.builderofstuff.com
>> http://www.myspace.com/builderofstuff
>> http://www.myspace.com/builderofbluesharps
>>
>>
>> Just a man, his shop, and a long list of unfinished projects...
>>
>> _______________________________________________
>> Harp-L is sponsored by SPAH, http://www.spah.org
>> Harp-L@xxxxxxxxxx
>> http://harp-l.org/mailman/listinfo/harp-l
>>
>>   
>
>_______________________________________________
>Harp-L is sponsored by SPAH, http://www.spah.org
>Harp-L@xxxxxxxxxx
>http://harp-l.org/mailman/listinfo/harp-l

= = = = = = = = = = = = = = = = = = = =
			

Best regards.				 
john
jjthaden@xxxxxxxxx
2008-06-01