[Harp-L] Sonny Jr 410 line out kits
For anyone who has a Sonny Jr 410 that wants to install the true speaker
sounding line out, I will have the full kit of every part you will need plus
comprehensive instructions with a diagram. A tech should do the work unless you
are an engineer and have done this type of soldering work before. I am not
responsible if it gets screwed up, we made it so detailed any tech should be
able to do it in a half hour to 45 minutes. I am not accepting any chassis's
here to do the work so please keep that in mind. It just gives you an
advantage if you are in a situation and just want to go into the PA. But you could
always double dip and do line out plus mic a speaker for an even thicker sound.
All reports from line out of the Cruncher have been highly positive. The
mathematical equation to determine the parts values for the 410 was done by my
master engineer, Keith Robb, who designed the Cruncher's line out. Contact me
towards the end of the week when I will have them and know how much it is.
Sincerely, Sonny Jr.
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100000075x1215047751x1200957972/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
cemailfooterNO62)
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.