Re: [Harp-L] EV 605 Cable

["Splash" <celtiac@xxxxxxxxxxxxx>]

If the microphone is hard-wired and the cable is terminated in a switchcraft
5/8" 2501F connector, you could screw the 5/8" connector onto one of these.

http://www.angela.com/catalog/microphones/mics.6.gif


found here:  http://www.angela.com/catalog/microphones/Microphones.html



PEACE
Scott
Believe in Magic!
----- Original Message -----
From: "Donnie MorTone" <harp_boy@xxxxxxxxxxx>
To: <Bobby@xxxxxxxxxxxxxxxxx>; <harp-l@xxxxxxxxxx>
Sent: Thursday, March 29, 2007 10:08 PM
Subject: RE: [Harp-L] EV 605 Cable


> >From: "Bobby BlackHat" <Bobby@xxxxxxxxxxxxxxxxx>
> >To: <harp-l@xxxxxxxxxx>
> >Subject: [Harp-L] EV 605 Cable
> >Date: Thu, 29 Mar 2007 21:11:34 -0400
> >
> >I just picked up an EV 605.  It came with a kind of stiff gray cable with
a
> >screw on connector.   Does anyone have a recommendation for a replacement
> >cable?
> >
> >Bobby
>
> If it's a single conductor type screw on cable, (which you can tell
> if it has just a single dot of solder on the female connector of the
cable,
> and the same for the male connector on the mic) then the simplest
> solution is to get a screw-on to 1/4" adaptor for the mic, then just use
> a good guitar cable if you're plugging into an amp. The easiest type of
> adaptor to find is the Switchcraft 332a...they are on Ebay all the time.
> As a matter of fact, our list member Wendell Jenkins sells them on Ebay
> quite a bit..and I'm sure he could hook you up.
>
> His Ebay handle is Bacon-Fat....
>
> If he reads this...perhaps he can contact you?
>
> ~Donnie~
>
> The Ultimate William Clarke Tribute Site
> http://www.angelfire.com/blues/williamclarke/index.html
>
> MorTone Microphone
> http://www.angelfire.com/music4/mortone/index.html
>
>
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
>