Re: [Harp-L] Poor man's embossing station, with appropriate thanks

In a message dated 6/21/2007 8:42:27 P.M. Eastern Daylight Time,  
rick.dempster@xxxxxxxxxxx writes:

Thanks for that. Do you, or anyone  else, think there would be any value in 
embossing both sides of the slot. In  other words, not only the side of the 
plate where the reed is mounted, but the  other side. I'll try it myself when I 
get a break in the traffic; but it keeps  playing on my mind.
   To my knowledge, the general wisdom is that the reed side of  the reed 
plate is the effective side to emboss because it reduces  the tolerances between 
the reed and the slot.  I suspect that  embossing the underside would have no 
perceivable affect on reducing the  tolerances between the reed and the slot.


************************************** See what's free at

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.