----- Original Message -----
From: "Tim Moyer" <wmharps@xxxxxxxxxxxxxxxxxxxx>
To: <harp-l@xxxxxxxxxx>
Sent: Tuesday, February 27, 2007 8:24 AM
Subject: Re: Re: [Harp-L] Nails in Combs
fjm wrote:
2 screws on a dead flat comb and plate combination
work just fine.
It also helps if the plates are bowed slightly toward the comb in the
center so that pressure at the ends creates additional pressure in the
center without screws.
-tim
The covers can be similarly bowed to apply pressure on the reedplates at the
front where it is difficult to use fasteners..