RE: [Harp-L] Shure CM element question

["steve" <mudharp@xxxxxxxxxx>]

 I've got a few like that and one is very hot, so if it sounds good then got with it.  Let your ear be the judge. steve--- On Wed 06/07, Jay Thompson < jay.jmt@xxxxxxxxx > wrote:From: Jay Thompson [mailto: jay.jmt@xxxxxxxxx]To: harp-l@xxxxxxxxxxxxxx: Wed, 7 Jun 2006 22:47:24 -0400Subject: [Harp-L] Shure CM element questionI just picked up a couple of Shure 444 desk mics with Hi-z CM elements.These are the plastic mics with the grill that screws off like a peanutbutter jar lid.Both of these elements appear to have a thin pressed on shield over the faceof the element with one hole in the center. When looking through the centerhole it appears that the normal holes are visible underneath. What is yourexperience with these? Should I cut these covers off with snips or ?I harvested an element from one of these previously which did not have thisone-holed cover.Thanks in advance,Jay_______________________________________________Harp-L is sponsored by SPAH, 
http://www.spah.orgHarp-L@xxxxxxxxxxxxxx://harp-l.org/mailman/listinfo/harp-l

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!