Dang... Sounds almost like a jaw harp.
How low can you go?
Howard
Tim Moyer - Working Man's Harps wrote:
I started with a low D and used silver solder, then polished it up to A.
Thanks!
-tim
At 06:07 PM 7/5/2006, you wrote:
From: "Tim Moyer - Working Man's Harps" Harp
I recently built a low A harp ...
Thanks for posting that. Sounds real good.
How did you weight the reeds on the low A?
Peace and music,
Dave
_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxxxxxxxx
http://harp-l.org/mailman/listinfo/harp-l
_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxxxxxxxx
http://harp-l.org/mailman/listinfo/harp-l