Re: [Harp-L] Source for 0/90 screws

[G <gigs@xxxxxxxxxxxxxxx>]

Date: Mon, 10 Oct 2005 13:05:52 -0000
From: "Tim Moyer" <wmharps@xxxxxxxxxxxxxxxxxxxx>
Subject: Re:  [Harp-L] Source for 0/90 screws
To: harp-l@xxxxxxxxxx

>Michael Easton wrote:
>> I found a site that supplies the stainless steel flat head 0/90 
>> 1/8  inch screws that Farrell use to carry.
>> They are very expensive compared to Farrell's prices.  If I find a  
>> lower price site I'll make it known.
>> go here: http://www.smallparts.com/products/descriptions/mx%2df.cfm
>
>I'm guessing you mean #00-90 tpi, not #0-80 tpi screws.  There's a huge 
>price difference (10x) between the two of them.  
>-tim

I've found 0-80 machine screws and small hex nuts are great for all sorts
of things, from screwing down reed plates to replacing reeds with screw and
nut.
  You'll find them at McMaster & Carr too.
-- G.