RE: [Harp-L] amp build suggestions sought

["steve" <mudharp@xxxxxxxxxx>]

 A little different than your push pull sockets, but you have the chassis ready to go. My next project is to build the 5F2H circuit designed by Bruce Collings of Mission Amps.  The kit from www.webervst.com .  It uses a big KT66 tube and you'll  have the nasty single ended design.  Pushing about 10 watts and that's in between the Champ and the Deluxe, but with serious scream that sounds very loud.It's 450 bucks with a tweed cab and I believe 350 without the cab.  ***** Hint ****** You can also get all the specs, If I remember, right there on the site to bypass the parts cost that you don't need.   hope this helps,stevewww.thunderharpmics.com --- On Sat 10/08, Dina Janzen < dlj@xxxxxx > wrote:From: Dina Janzen [mailto: dlj@xxxxxx]To: harp-l@xxxxxxxxxxxxxx: Sat, 8 Oct 2005 00:18:58 -0500Subject: [Harp-L] amp build suggestions soughtI have a small chassis with Princeton Reverb size transformers, three octal and two nine pin sockets, gutted and ready to build, but I can't 
decide between Harvard 5F10, brown Princeton 6G2, brown Deluxe 6G3 circuits. Any suggestions?Jim R_______________________________________________Harp-L is sponsored by SPAH, http://www.spah.orgHarp-L@xxxxxxxxxxxxxx://harp-l.org/mailman/listinfo/harp-l

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!