RE: [Harp-L] Arcing reeds up

[Winslow Yerxa <winslowyerxa@xxxxxxxxx>]

Pierre writes:

Currently I support the tip and push down with a toothpick to arc up,
but that can create a dip into the slot towards the rivet which is bad,
is there a better way?

While I'm at it, one of the worst problem is adjusting a reed, putting
the harp back together only to find that nothing has changed. I often
do this 5, 6 times in a row.  Is it possible to get feeler gauges with
very small gradiants to see the change? where can one buy such gauges?
has anybody tried this? is this worth pursuing?

=============Winslow writes:

I find that stroking a reed along its length causes it to curl upwards
(i.e. in the direction of the surface that is stroked). I support the
reed with a brass shim (a piece of brass, thin like a feeler gauge
tongue) and stroke it along its length with a brass tool that has a
wide, flat edge (similar to a scewdriver but curved at the end - DON'T
use a steel screwdriver as you'll scratch brass off the reed). You can
strok the entire length if the unweighted portion of the reed or just
one spot.

If you want to get a downward curve you can turn the reedplate over and
place it flat on a firm surface - the reed pads and rivets will need to
hang off the edge - and stroke it through the slot.

After any adjustment I always "plink" the reed - lift the reed tip and
let it go so that it vibrates freely. Plinking and reverse plinking -
puliing the reed tip down through the slot and letting it go - can also
be used to make small adjustments in the reed profile if the reed is
lifted far enough to flex it along its length.

I haven't really tried to use feeler gauges except to get an idea how
close the reed is to the slot at the base of the reed. For the rest, I
eyeball to see that the reed doesn't dip into the slot, stays fairly
flat for much of its length, then curves slightly upward to the desired
gap. The sound the reed makes when plinked is also telling, as you can
hear how energetically it responds when plinked.

Winslow

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com