[Harp-L] Dixieland Jazz



That was Mr. Joe Martin on dixieland harp. The one and only.....Jerl

-----Original Message-----
From: harp-l-bounces@xxxxxxxxxx [mailto:harp-l-bounces@xxxxxxxxxx]On
Behalf Of harp-l-request@xxxxxxxxxx
Sent: Saturday, July 16, 2005 11:45 AM
To: harp-l@xxxxxxxxxx
Subject: Harp-L Digest, Vol 23, Issue 40


Send Harp-L mailing list submissions to
	harp-l@xxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
	http://harp-l.org/mailman/listinfo/harp-l
or, via email, send a message with subject or body 'help' to
	harp-l-request@xxxxxxxxxx

You can reach the person managing the list at
	harp-l-owner@xxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Harp-L digest..."


Today's Topics:

   1. Subject: Re: [Harp-L] cleaning tips /THE SEXY ROCKER'S OCD
      RITUAL (EGS1217@xxxxxxx)
   2. Dixieland Jazz Harp? (Jonathan Metts)
   3. Re: Re: What Does the TurboLid Fit? (nonidesign@xxxxxxx)
   4. OFFICIAL PRESS RELEASE: Sam Myers Benefit - Aug 26 @	Granada
      Theater (HASHBB@xxxxxxx)
   5. Re: Dixieland Jazz Harp? (Moandabluz@xxxxxxx)
   6. Re: Sweet Georgia Brown (Bob Meehan)
   7. Subject: Re: [Harp-L] Sweet Georgia Brown  (randy singer)
   8. listening to non harp music (rainbowjimmy@xxxxxxxxxxxxxxxx)
   9. learning from listening harp music (rainbowjimmy@xxxxxxxxxxxxxxxx)
  10. Re: Sonny Jr Amps (B Boggs)
  11. Re: listening to non harp music (Planet Harmonica)


----------------------------------------------------------------------

Message: 1
Date: Thu, 14 Jul 2005 23:20:12 EDT
From: EGS1217@xxxxxxx
Subject: Subject: Re: [Harp-L] cleaning tips /THE SEXY ROCKER'S OCD
	RITUAL
To: harp-l@xxxxxxxxxx
Cc: richard@xxxxxxxxxxxxx, jason@xxxxxxxxxxxxxx
Message-ID: <7b.49252bd1.3008856c@xxxxxxx>
Content-Type: text/plain; charset="US-ASCII"

Fernando writes:

"I have cleaned a harmonica in a small ultra sound machine once. Since I
had to rinse it with water afterwards, because o the detergent used in
teh machine, I came to the conclusion that it is easier just to wash the
plates in water and use a tooth as help.

All the  best,
Fernando"

......I recently bought a Digital Ultrasonic cleaner thinking to use it for
my harmonicas (specifically my chromatics since I'd watched a repair guy do
just  that at Buckeye).  The only problem is the container turned out  to be
far
too small (of course) for my Super 64 to be immersed - duh!   The GOOD thing
is -- it works with plain water - doesn't need the detergent at  all unless
you want "enhanced cleaning".  I haven't used it yet, but just  fetched a
bunch
of my harps to see how many would fit.  Without the basket  (recommended
only
for small items because it "absorbs 30% of the ultrasonic  energy" (and
thereby reduces the cleaning power) - the stainless tank can  hold FOUR SP
20's
lengthwise mouthpiece down (which is how I'd clean them,  anyway).
Separately I
was able to fit two older 10-hole Chroms side by  side with a little
jostling.
I'm not sure I'd use it for those since  they're wood bodied.  I got this
machine for roughly $40 online (a steal)  -- because I was told the warmth
and
agitation of an ultrasonic cleaner can  allow mangled or distorted
windsavers to
even out again without replacing.   Of course that discussion specifically
related  to my Super 64 and I still might be able to use this  machine for
that
purpose by angling the harp and leaving the lid open  (something it allows
for
- since it's also for cleaning  utensils).  Overall it's compact enough and
a
much better jewelry cleaner  than my previous model with the added bonus of
cleaning eyeglasses, other  small machinery parts, razors, waterproof
watches
and the like.   For those with dentures - it even claims to do those!  I
haven't yet tried  the "English" Richard Smith's denture cleaner.  That's
probably
going to be  something I'll try out somewhere down the road, too.

Separately - getting back to SEXY ROCKER Jason's meticulous OCD  method of
cleaning his harps:  I do something similar, consider myself a  bit of a
fanatic
about getting mine as clean as possible so begin  with  rubbing alcohol, a
toothbrush (I use the "reach" ones since the top  part gets further into the
areas I need it to) designated just for my that  purpose, wooden toothpicks
(but
admit to using some of my smaller screwdrivers  just as Jason does), some
lint-free cloths (actually I use something called  "Scott's Rags" - they're
from
this Big Box I got years ago at one of the  Warehouse Clubs in the
Automotive
section - (to use for detailing and staining  work for furniture) - found
out
when I was down to my last 50 or so that they're  the perfect disposable
cloth
for cleaning and polishing harmonicas (here's a  link I just found from Ace
Hardware _http://www.acehardware.com/product/index.jsp?productId=1275301_
(http://www.acehardware.com/product/index.jsp?productId=1275301)

So I work barehanded (since plastic or rubber gloves leave marks on the
harps, lol), at an old desk with paper towels on my lap and the desk and my
"rags" off to the side -- dip the toothbrush into the alcohol (kind of like
Jason's set up - but instead of soaking the plates and covers I hold them in
one
hand and clean them over a paper plate with paper towels with the
toothbrush)
and then getting into every corner with the toothpicks.  I might do this
several  times to make sure any goo is gone.  Then wipe them  thoroughly
with one
of the cloths.  Then, while the harp is still  disassembled and dried off, I
use my MAAS polishing creme.  I bought it at  a supermarket in Ohio - so
have no
idea where I can find it in my own area  except online (they do have a
website
_http://www.alwaysbrilliant.com/?PID=306&SC=98
275&PN=Maas%20Polish&KW=Maas%20Polishing%20Creme_
(http://www.alwaysbrilliant.com/?PID=306&SC=98275&PN=Maas%20Polish&KW=Maas%2
0Polishing%20Creme)
  A little goes a very long way and even after the harp looks and  seems
immaculate, one would be astonished by the amount of black stuff  coming off
every
metal surface you thought was already clean.   I use  a tiny amount squeezed
onto the cloth which I then work into every surface I can  access including
around the reeds.  If some inadvertently gets in or onto  the reeds
themselves I
clean it off with the toothbrush again dipped in the  alcohol and
toothpicks.
 This works even on the brass plates -  they shine like gold when done with
this creme.  I do the inside and  outside of every surface of the mouthpiece
of
my chromatics as well as the  covers.  The beauty of this for me - is that
it
eliminates that extra step  Jason takes -- that of having to scrape with the
screwdriver to remove the  pitting or rust residue.  Even on old chroms I've
bought from EBay -- I  found only one beyond salvaging this way.  This Maas
stuff claims to remove  rust and pitting and it really has so far -- just
with
finger  polishing, though I'm sure if the pitting was really extensive one
could
utilize  a polishing tool of some kind (Steve Shaw broached this subject
some
months  back, I believe).  After removing all of the creme and wiping every
interior surface, I reassemble (am no good at gapping yet, much to my
dismay)
and then polish the entire harp again with a tiny drop of the cream, then
buff  with the cloth.  They look factory new and the creme seems to prevent
further rusting or pitting.  I've said this before -- It was really  nice to
hear
Jimmy Gordon comment and then repeat at Buckeye just how clean my  old
10-hole
chromatic was - right down to the spacers.  I hadn't realized  before it
probably means I'm a bit OCD myself  -- but if that allies  me with Jason,
the
SEXY OCD Rocker/fanatic harp cleaner-player extraordinaire, I  ain't in bad
company :-)    (but I think I'll leave the 300 gigs  a year to him.. <g>)

Elizabeth



------------------------------

Message: 2
Date: Fri, 15 Jul 2005 22:39:08 -0500
From: "Jonathan Metts" <jonathan@xxxxxxxxxxxxxxxxxx>
Subject: [Harp-L] Dixieland Jazz Harp?
To: <harp-l@xxxxxxxxxx>
Message-ID: <133d01c589b7$ec696dc0$088e0c47@Jonny>
Content-Type: text/plain;	charset="iso-8859-1"

Reading the posts about "Sweet Georgia Brown", a couple of words caught my
eye..."Dixieland Jazz".  This is definitely my favorite type of jazz, but
I've never heard of harmonica being used with the style.  Can anyone
recommend some players and albums?  It seems like a natural matchup of
instrument to music now that I think about it, since Dixieland already uses
so many wah-like hand/mute effects that sound quite similar to harmonica
effects.  And the horns seem intended to sound like human voices, which the
harmonica also excels at (in some cases, at least).  Wow, I'm getting
excited just thinking about the possibilities now.

Jonathan Metts



------------------------------

Message: 3
Date: Fri, 15 Jul 2005 16:10:56 +0000
From: nonidesign@xxxxxxx
Subject: Re: [Harp-L] Re: What Does the TurboLid Fit?
To: Marcio Marchini <mqm@xxxxxxxx>, harp-l@xxxxxxxxxx
Message-ID:
	<071520051610.13958.42D7E010000114330000368621603831160209079C0A0B07020102@
att.net>

Content-Type: text/plain

For what it's worth I like the Turbolids to check tuning work. They're easy
on & off. I don't like how they feel for regualr playing though (theyt feel
too "fat" for my taste) but after tweaking a reed or whatever on an SP20
they are a lot easier to use than screwing on the metal lids and screwing
them down.

-------------- Original message from Marcio Marchini
<mqm@xxxxxxxx>: --------------


>
> I can provide feedback on Marine Bands. Even though they have an
> adapter for it, it does not fit well at the top. There will be a large
> gap between the turbolid and the harp itself, and air will leak like
> crazy. I used to hate Marine bands until I realized I had never played
> them without the TurboLid. I put it back to the original setup, and I
> love the original MB now (I do seal the comb though). So, don't waste
> time on a MB+Turbolid. Unless they fixed that now (my experiment is
> about 1 year old).
>
> But TurboLids on a SP20 work great.
>
> marcio
>
> > ------------------------------
> >
> > Message: 6
> > Date: Wed, 13 Jul 2005 23:38:50 -0500
> > From: Don Whitener
> > Subject: [Harp-L] What Does the TurboLid Fit?
> > To: Harp-L
> > Message-ID: <5.2.0.9.2.20050713233120.00bfede0@xxxxxxxxxxxxxxx>
> > Content-Type: text/plain; charset="us-ascii"; format=flowed
> >
> > On the TurboHarp web site, it is stated that the TurboLid is "engineered
to
> > snap directly on to the Hohner S-20, as well as several other popular
harp
> > models." Does anyone have first hand information on what other harp
models
> > are compatible with the TurboLid? Any input, yea or nay, will be
appreciated.
> >
> > CDon
>
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l

------------------------------

Message: 4
Date: Fri, 15 Jul 2005 15:03:12 EDT
From: HASHBB@xxxxxxx
Subject: [Harp-L] OFFICIAL PRESS RELEASE: Sam Myers Benefit - Aug 26 @
	Granada Theater
To: BLUES-L@xxxxxxxxxxxxxxxxxx, DIRTYBLUES@xxxxxxxxxxxxxxx,
	HARP-L@xxxxxxxxxx
Message-ID: <68.59aabeb7.30096270@xxxxxxx>
Content-Type: text/plain; charset="utf-8"

Here is the official press release for the Sam Myers benefit. feel free to
forward
this to any site or person interested.
Much thanks to everyone,
HB

<< Please find the attached RELEASE on Sam Myers Blues Benefit, to be held

August 26 at Granada Theater.



Tickets go ON SALE tomorrow at www.granadatheater.com and CD World.



We appreciate your listing and coverage of this important event.



If you have any questions, or need further information - just let me know!

Thank you -

Kathy Prather, PR

h/w:  972.381.1604

cell:  214.697.7877



TEXT OF PRESS RELEASE BELOW:


For Immediate Release:





SAM MYERS BLUES BENEFIT TO BE HELD AT GRANADA THEATER

FRIDAY, AUGUST 26




b






This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.